BLACKHORSE-RACING 1.75" 1 3/4" Accuseal Clamp Butt Joint Narrow Band Exhaust Seal Clamp


BLACKHORSE-RACING 1.75" 1 3/4" Accuseal Clamp Butt Joint Narrow Band Exhaust Seal Clamp




Features
  • -- Size: Minimum Diameter: 1 3/4" (1.75"); Maximum Diameter: 2"
  • -- Band Width: 1 1/4" (1.25"); Band Thickness: 1/16" (.0625"); Height: 3"; Hex Nut: 15mm Metric
  • -- Available in a wide range of styles and sizes. You would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.
  • -- Seal exhaust band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
  • -- Save Time and Effort: Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort.
  • BLACKHORSE-RACING 1.75" 1 3/4" Accuseal Clamp Butt Joint Narrow Band Exhaust Seal Clamp





    Features
  • -- Size: Minimum Diameter: 1 3/4" (1.75"); Maximum Diameter: 2"
  • -- Band Width: 1 1/4" (1.25"); Band Thickness: 1/16" (.0625"); Height: 3"; Hex Nut: 15mm Metric
  • -- Available in a wide range of styles and sizes. You would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.
  • -- Seal exhaust band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
  • -- Save Time and Effort: Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort.
  • BLACKHORSE-RACING 17.5" to 24.5" Tire Changer Mount Demount Removal Tool Tubeless Truck Extra Bead Keeper Yellow





    Features
  • ▲ 【Easy to Use】 this high-quality tire mount/demount tool set is specially designed to simplify mounting and demounting stubborn 17.5" to 24.5" tires and protecting wheels. Eliminates the need to lift & rim to remove the bottom bead. Only one tool needed to demount tires.
  • ▲ 【Strong And Durable】heavy duty drop-forged carbon steel construction, 3mm seamless tube main-body, powder coated gloss finish surface, makes this tire mount demount tool smooth and rust-proof, ensures long life.
  • ▲【Features Nylon Rollers】protecting the tire bead, preventing possible strain or even serious damage and saving valuable casings for successful retreading.
  • ▲【Dimensions (LxWxH)】39.4"x11.8"x9.8" (100*30*25cm)
  • ▲【Utility】wide range of applications and universal fit for many kind of vehicle. Our manual tire changer suits for most radial & bias ply tires.
  • BLACKHORSE-RACING 1" Go Kart Torque Converter CVT Comet Clutch Go Kart Clutch Replaces Comet 219554A 203814A TAV2 30-75 Yerf Dog Manco Mini Bike 10T #40/41/420 Chain





    Features
  • This Go Kart Torque Converter Kit fits a 1" shaft and comes with a 10 tooth sprocket for a #420 /#40 /#41 chain. It will work with small engines producing 8 HP-13 HP
  • Unit Replaces Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75, Yerf Dog Drive Unit Q43201W
  • Compatible with most engine with horizontal shaft such as Briggs, Robin, Tecumseh, Hon-da (and clones), Kohler, Clinton, Lifan
  • This kit comes with a 5/8" Driven Clutch with 6" inner Diamerer, fits all engines with a 1" Straight Crankshaft, replaces Comet, also fits Manco Go Karts, Comet 219554A
  • Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, and waterski winches
  • BLACKHORSE-RACING Universal Heavy Duty Stainless Steel Exhaust Flex Pipe Double Braid 1.75"(1 3/4") ID x 4" Long





    Features
  • Ⓞ T304 Stainless Steel Double Braid w/ T409 Stainless Steel End Caps
  • Ⓞ 1.75" x 4" Flex Pipe
  • Ⓞ Inlet/Outlet: 1.75" (1 3/4") ID, Visible Braid Length: 2.1875" (2 3/16")
  • Ⓞ Overall Length: 4", Braid Outside Diameter: 2.625" (2 5/8")
  • Ⓞ Fitment For: Universal(Installation should depend on the inside diameter and outside size)
  • BLACKHORSE-RACING 2.5" OD 3" ID Universal Exhaust Pipe to Component Pipe Adapter Reducer Kits Reliable Stainless Steel 2.5 Inch to 3 Inch





    Features
  • ۞Material: High quality stainless steel
  • ۞Small Diameter: 2.5” OD (Fits inside 2 1/2” ID Component)
  • ۞Large Diameter: 3“ ID (Fits over 3” OD Pipe)
  • ۞Length May Vary: Approx. 6 1/8”
  • ۞Metal Thickness May Vary: Approx. 1/16”
  • Universal Muffler 3" Inlet 3" Center Outlet Aluminized Steel 3 Inch Exhaust Chamber Race Muffler





    Features
  • Ⓞ Aggressive Sound Level
  • Ⓞ 7" Muffler Body Length, 13" Overall Length, 3" Muffler Inlet And Outlet Diameter
  • Ⓞ To help direct exhaust gases out of the engine
  • Ⓞ Universal chamber Race street Muffler 2.50" In / 2.50" Out.
  • Ⓞ Thanks for your encouraging review and feedback! It really increases our service level and passion of work! Incase you meet problem with our products, please contact us first before you give feedback and review. We will assure you will get the best solution and service.
  • BLACKHORSE-RACING 3" 76mm Stainless Steel T304 DIY Custom Mandrel Exhaust Flex Pipe Straight & Bend Kit





    Features
  • 🔯 3 Inch 304 Stainless Steel Grade Piping Includes 2 each: 45 degree bends, 90 degree bends, 180 degree bends and 48 inch straight pipe exhaust lengths
  • 🔯 Each 3" smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation
  • 🔯 Universal kit includes all the necessary 3" exhaust pipe bends and straights to allow you to run your own custom exhaust systems
  • 🔯 Straight Pipes Length: 47.25" or 120cm; Average Leg Length = 5 1/2"
  • 🔯 Perfect Do It Yourself kit with plenty of options for your motorcycle, automotive, hotrod, atv or any other need you may have.
  • 48" Black Stainless Steel Radiator Flexible Coolant Hose Kit With Caps Universal





    Features
  • 48" Stainless Steel Radiator Flex Hose Kit
  • Kit contains enough ends for 2 lengths of hose
  • This kit can be used with 1 1/4", 1 1/2", or 1 3/4" radiator necks
  • Flexible design eliminates the hassle of finding a rubber hose with just the right bends
  • Stainless hose will not blow or rot out like a rubber one
  • BLACKHORSE-RACING T304 Stainless Steel Straight Exhaust Pipe Tubing Steel Straight Tube Piping 16 Gauge 4FT Long 2.5" Inch OD Tailpipe Exhaust Pipe Exhaust System





    Features
  • Ⓞ Inlet diameter: 2.5". outlet diameter: 2.5". overall length: 4FT/1.2m. check product details below for other sizes.
  • Ⓞ Manufactured from T304 Stainless Steel for durability
  • Ⓞ Designed to perform and fit like original equipment
  • Ⓞ Universal exhaust pipe - not a direct fit. Some adaptation required.
  • Ⓞ Excellent resistance to corrosion and oxidation resistance