DEWALT Angle Grinder Tool, 7-Inch/9-Inch, 5.3-Horsepower (D28499X)


DEWALT Angle Grinder Tool, 7-Inch/9-Inch, 5.3-Horsepower (D28499X)




Features
  • High power 5.3 HP (maximum motor HP) and 6,000 rpm motor of angle grinder with overload protection provides higher operating speeds under load
  • Rotating rear handle provides improved ergonomics in cutting and grinding applications for the metal grinder
  • 5-position side handle of DEWALT angle grinder provides improved ergonomics for specific applications
  • Epoxy coated field and armature provide long service life against abrasion from airborne debris
  • Low-profile gear case allows for work in tight areas
  • Keyless adjustable guard provides tool-free guard adjustments to increase productivity
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage
  • 6,000 RPM provides optimal material removal with 9-inch grinding wheels
  • 2-wire double insulated 'S' jacket rubber cord provides increased durability and life in hot and cold climates
  • This product runs off of AC/DC power
  • DEWALT Angle Grinder, One-Touch Guard, 4-1/2 -Inch (DWE4011) , Yellow , Small





    Features
  • 7 amp AC/DC, 12,000 rpm motor of the angle grinder is designed for faster material removal and higher overload protection
  • One-Touch guard of the metal grinder eliminates the need for a tool to adjust the guard location.
  • Hex wrench replaces spanner wrench of DEWALT angle grinder - hex wrench can be found in most tool boxes
  • Quick-Change wheel release allows tool-free wheel removal without the need for a wrench
  • 2-position removable side handle provides increased comfort and control
  • Slim, ergonomic body design provides increased comfort in extended use applications
  • 5/8-inch 11 spindle thread accepts a wide range of 4-1/2=inch accessories
  • Replaces D28110
  • This product runs off of AC/DC power
  • DEWALT Angle Grinder Tool Kit with Bag and Cutting Wheels, 7-Inch, 13-Amp (DW840K) , full size , Yellow





    Features
  • 13.0 Amp AC/DC, 8,000 rpm motor of the angle grinder provides high power and speed for 7-inch grinding applications
  • DEWALT angle grinder has high power-to-weight ratio for greater efficiency and reduced user fatigue
  • Adjustable guard of the metal grinder can be adjusted to redirect sparks away from user
  • Rear handle design for greater comfort and control
  • External brush caps for easy servicing
  • Sealed ball and roller bearings for extended motor life
  • Spindle lock button allows for single-wrench bit changes
  • DEWALT Angle Grinder, 7-Inch, 8,500 RPM, 4.7-HP (DWE4557) , Yellow





    Features
  • High power 4.7 HP (maximum motor HP) 8,500 rpm motor of the angle grinder with overload protection provides higher operating speeds under load
  • Dust Ejection System of the metal grinder protects the motor from damaging particles entering air intake that would otherwise abrade the motor and increases brush life
  • Anti-vibe trigger handle of DEWALT angle grinder reduces user fatigue caused by vibration
  • Lightweight design (11.6 lbs) lessens user fatigue
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage
  • Low-profile gearcase allows for work in tight areas
  • 8,500 rpm provides optimal material removal with 7-inch grinding wheels
  • Brush door allows for quick brush replacement
  • Quick-Change guard allows user to quickly adjust guard to redirect sparks
  • Soft-grip trigger handle provides greater comfort and control
  • DEWALT Angle Grinder, 7-Inch, 8,500 RPM, 4.9-HP (DWE4597)





    Features
  • Anti-Rotation E-CLUTCH System of the angle grinder activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
  • High power 4.9 HP (maximum motor HP) 8,500 rpm motor of the metal grinder provides overload protection giving higher operating speeds under load
  • Anti-Rotation E-CLUTCH System activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor of DEWALT angle grinder.
  • Anti-vibe side handle is a Perform and Protect feature that reduces the users exposure to vibration
  • Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position
  • Power-Off advanced electronic overload protection shuts the tool off before it reaches overload or burn-up
  • Dust Ejection System increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor
  • Low-profile gearcase allows for work in tight areas
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage
  • 3-position side handle provides improved ergonomics for specific applications
  • DEWALT Angle Grinder Tool, 4-1/2-Inch, Paddle Switch, 7-Amp (DWE4012)





    Features
  • 7.5 amp AC/DC, 12,000 rpm motor of the angle grinder is designed for faster material removal and higher overload protection
  • One-Touch Guard of the metal grinder allows for a single action to adjust the guard. No buttons or levers, just turn the guard to position it.
  • Hex wrench which can be found in most tool boxes replaces spanner wrench of DEWALT angle grinder
  • Low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces
  • Quick-Change wheel release allows tool-free wheel removal without the need for a wrench
  • 2-position removable side handle provides increased comfort and control
  • Slim, ergonomic body design provides increased comfort in extended use applications
  • 5/8-inch 11 spindle thread accepts a wide range of 4-1/2-inch accessories
  • This product runs off of AC/DC power
  • DEWALT Angle Grinder Tool, 7-Inch/9-Inch, 5.3-Horsepower (D28499X)





    Features
  • High power 5.3 HP (maximum motor HP) and 6,000 rpm motor of angle grinder with overload protection provides higher operating speeds under load
  • Rotating rear handle provides improved ergonomics in cutting and grinding applications for the metal grinder
  • 5-position side handle of DEWALT angle grinder provides improved ergonomics for specific applications
  • Epoxy coated field and armature provide long service life against abrasion from airborne debris
  • Low-profile gear case allows for work in tight areas
  • Keyless adjustable guard provides tool-free guard adjustments to increase productivity
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage
  • 6,000 RPM provides optimal material removal with 9-inch grinding wheels
  • 2-wire double insulated 'S' jacket rubber cord provides increased durability and life in hot and cold climates
  • This product runs off of AC/DC power
  • DEWALT Angle Grinder, 9-Inch, 6,500 RPM, 4.7-HP (DWE4559N) , Yellow





    Features
  • High power 4.7 HP (maximum motor HP) 6,500 rpm motor with overload protection provides higher operating speeds under load for the angle grinder
  • Dust Ejection System increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor of the metal grinder
  • DEWALT angle grinder comes with anti-vibe trigger handle to reduce user fatigue caused by vibration
  • Lightweight design (12.1 lbs) lessens user fatigue
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage
  • Low-profile gearcase allows for work in tight areas
  • 6,500 rpm provides optimal material removal with 9" grinding wheels
  • Brush window allows for quick brush replacement
  • Quick-Change guard allows user to quickly adjust guard to redirect sparks
  • Soft-grip trigger handle provides greater comfort and control
  • DEWALT Angle Grinder Guard for Type 27 Grinding Wheels, 7-Inch (D284937)





    Features
  • Fits most DEWALT 7-inch angle grinders
  • Compatible with DEWALT grinder models DWE4517, DWE4519, DWE4557, DWE4559CN, DWE4559N, D28499X, DWE4597, DWE4597N, DWE4599N
  • Does not fit DW840 and DWE43840CN
  • DEWALT Angle Grinder Dust Shroud for Surface Grinding, 7-Inch (DWE46170)





    Features
  • Spring loaded; Hinged door; Provides a dust collection solution for both open area grinding and flush edge grinding
  • Universal Connector locks onto tool with a twist and click
  • Tool free clamp system is compatible with all DEWALT Large Angle Grinders
  • Aids in dust collection and containment, a Perform & Protect Dust Feature
  • Helps reduce user exposure to harmful Silica Dust